Free 52545.pdf - Indiana

OAQ PROCESS INFORMATION APPLICATION PI-05: Brick & Clay Products
State Form 52545 (R / 1-07)

INDIANA DEPARTMENT OF ENVIRONMENTAL MANAGEMENT

IDEM ­ Office of Air Quality ­ Permits Branch 100 N. Senate Ave., MC 61-53 Indianapolis, IN 46204-2251 Telephone: (317) 233-0178, or Toll Free: 1-800-451-6027 x30178 (within Indiana) Facsimile Number: (317) 232-6749 www.idem.IN.gov/permits/air/index.html

NOTES:

· · ·

The purpose of this form is to obtain detailed information about the Brick and Clay Products manufacturing process. Complete one form for each process unit (or group of identical process units). Detailed instructions for this form are available online at

www.idem.IN.gov/permits/air/apps/instructions/pi05instructions.doc .
All information submitted to IDEM will be made available to the public unless it is submitted under a claim of confidentiality. Claims of confidentiality must be made at the time the information is submitted to IDEM, and must follow the requirements set out in 326 IAC 17.1-4-1. Failure to follow these requirements exactly will result in your information becoming a public record, available for anyone to inspect and photocopy.

PART A: Process Summary Part A summarizes the Brick and Clay Products process. 1. Type of Process Material: 2. Maximum Final Product Throughput: tons per hour (tons/hr)

PART B: Brick and Clay Products Manufacturing Part A identifies the processes related to Brick and Clay Products Manufacturing and additional forms that may be needed. 3. Process a. Un-sized Raw Material Storage and Handling b. Raw materials processing
(crushing and sizing of raw materials)

4. Use the form listed for the specified processes. Check all that apply. This form is included for un-sized raw materials unloading / storage: PI-03 This form is included for raw materials processing: PI-18 N/A N/A

c. Sized Raw Material Storage and Handling d. Kiln

This form is included for the sized raw material storage / handling: PI-03 These forms are included for the kiln: PI-02A PI-02E PI-02G PI-02H N/A N/A N/A N/A N/A N/A

e. Fuel Type for Kiln (if other than
Natural Gas)

Submit form if fuel other than natural gas Is used in kiln: PI-02F This form is included for raw materials unloading / storage: PI-03 This form is included for (specify process): N/A N/A

f.

Finished Product Storage and Handling

g. Other process(es)

This space was intentionally left blank.

Continued on next page

Page 1 of 2

Indiana Department Of Environmental Management Office Of Air Quality State Form 52545 (R / 1-07)

Process Information ­ Brick & Clay Products FORM PI-05 Page 2 of 2

PART C ­ Federal Rule Applicability Part C identifies any federal rules that apply to the process. 5. Is a New Source Performance Standard (NSPS) applicable to this source?
If yes, identify the affected emission units and attach a completed FED-01 for each rule that applies.

Yes

No

6. Unit ID(s)

40 CFR Part 60, Subpart UUU

Calciners and Dryers in Mineral Industries Yes No 8. Unit ID(s)

7. Is a National Emission Standard for Hazardous Air Pollutants (NESHAP) applicable to this source? If yes, identify the affected emission units and attach a
completed FED-01 for each rule that applies.

40 CFR Part 63, Subpart JJJJJ 40 CFR Part 63, Subpart KKKKK 40 CFR Part 63, Subpart QQQQQ 40 CFR Part 63, Subpart SSSSS

Bricks and Structural Clay Products Manufacturing Clay Ceramics Manufacturing Friction Products Manufacturing Refractory Products Manufacturing

9. Non-Applicability Determination: Provide an explanation if the process unit appears subject to a rule (based on the rule title or the source category), but the rule will not apply.

This space was intentionally left blank.