OAQ PROCESS INFORMATION APPLICATION PI-08: Concrete Batchers
State Form 52548 (R / 1-07)
INDIANA DEPARTMENT OF ENVIRONMENTAL MANAGEMENT
IDEM Office of Air Quality Permits Branch 100 N. Senate Ave., MC 61-53 Indianapolis, IN 46204-2251 Telephone: (317) 233-0178, or Toll Free: 1-800-451-6027 x30178 (within Indiana) Facsimile Number: (317) 232-6749 www.idem.IN.gov/permits/air/index.html
NOTES:
· · ·
The purpose of this form is to obtain detailed information about concrete batch processes. Complete one form for each process unit (or group of identical process units). This is a required form. Detailed instructions for this form are available online at
www.idem.IN.gov/permits/air/apps/instructions/pi08instructions.doc .
All information submitted to IDEM will be made available to the public unless it is submitted under a claim of confidentiality. Claims of confidentiality must be made at the time the information is submitted to IDEM, and must follow the requirements set out in 326 IAC 17.1-4-1. Failure to follow these requirements exactly will result in your information becoming a public record, available for anyone to inspect and photocopy.
PART A: Process Information Part A identifies the process. If there are multiple units that are identical in nature, capacity, and use, you may use one form to summarize the data for the identical units. 1. Unit ID: 3. How many (identical) process units are identified in this form? 4. Raw Material (as a percentage of
total):
2. Installation Date:
(actual or anticipated)
One Sand: Aggregate: Cement:
More than one (specify number):
Other (specify): 5. Maximum Mixer Capacity (tons/year): 6. Maximum Amount of Concrete Produced (tons/hour): 7. Is this a Stationary Plant or a Mobile Plant? Stationary Plant
:
Mobile Plant
PART B: Emission Factors Part B identifies all emission factors used to calculate air emissions from this process. 8. Process Unit:
(& ID if applicable)
9. Air Pollutant:
10. Emission Factor:
value units
11. Source of Emission Factor
(if not using AP-42, include calculations)
AP-42 AP-42 AP-42 AP-42 AP-42
Other Other Other Other Other
This space was intentionally left blank.
Continued on Next Page
Page 1 of 2
Indiana Department Of Environmental Management Office Of Air Quality State Form 52548 (R / 1-07)
Process Information Concrete Batchers FORM PI-08 Page 2 of 2
PART C: Control Technology Part C identifies the methods used to control emissions from this process. 12. Add-On Control Technology: Identify all control technologies used for this unit, and attach completed CE-01 (unless "none"). None Baghouse / Fabric Filter Attach CE-02. Other (specify): Cyclone Attach CE-03. Attach CE-10.
13. Control Techniques: Identify all control techniques used for this process.
14. Process Limitations / Additional Information: Identify any acceptable process limitations. Attach additional information if necessary.
PART D: Federal Rule Applicability Part D identifies any federal rules that apply to the process. 15. Is a New Source Performance Standard (NSPS) applicable to this source?
If yes, attach a completed FED-01 for each rule that applies.
Yes
No
16. Unit IDs
40 CFR Part 60, Subpart F 40 CFR Part 60, Subpart I
Portland Cement Plants Asphalt Concrete Plants Yes No 18. Unit IDs
17. Is a National Emission Standard for Hazardous Air Pollutants (NESHAP) applicable to this source? If yes, attach a completed FED-01 for each rule that applies. 40 CFR Part 61, Subpart 40 CFR Part 63, Subpart LLL 40 CFR Part 63, Subpart
(specify):
Portland Cement Plants
(specify):
19. Non-Applicability Determination: Provide an explanation if the process unit appears subject to a rule (based on the rule title or the source category), but the rule will not apply.