Free 52553.pdf - Indiana

OAQ PROCESS INFORMATION APPLICATION PI-13: Lime Manufacturing
State Form 52553 (R / 1-07)

INDIANA DEPARTMENT OF ENVIRONMENTAL MANAGEMENT

IDEM ­ Office of Air Quality ­ Permits Branch 100 N. Senate Ave., MC 61-53 Indianapolis, IN 46204-2251 Telephone: (317) 233-0178, or Toll Free: 1-800-451-6027 x30178 (within Indiana) Facsimile Number: (317) 232-6749 www.idem.lN.gov/permits/air/index.html

NOTES:

· · ·

The purpose of this form is to obtain detailed information about the combustion process. Complete one form for each combustion unit (or group of identical combustion units). Detailed instructions for this form are available online at

www.idem.IN.gov/permits/air/apps/instructions/pi13instructions.doc .
All information submitted to IDEM will be made available to the public unless it is submitted under a claim of confidentiality. Claims of confidentiality must be made at the time the information is submitted to IDEM, and must follow the requirements set out in 326 IAC 17.1-4-1. Failure to follow these requirements exactly will result in your information becoming a public record, available for anyone to inspect and photocopy.

Part A: Lime Manufacturing Processes Part A identifies the processes related to Lime Manufacturing and additional forms that may be needed. 1. Process a. Quarrying Activities 2. Use the form listed for the specified processes. Check all that apply. This form is included for any quarry or mine activity: PI-18 b. Storage and Handling of Raw Materials c. Crushing and Sizing of raw materials (material processing) d. Storage and Handling of Ground materials e. Kiln These forms are included for the kiln: This form is included for raw materials unloading / storage: PI-03 This form is included for the processing of raw materials: PI-18 This form is included for ground material unloading / storage: PI-03 PI-02A PI-02E PI-02G PI-02H f. Fuel Type for Kiln (other than Natural Gas) Submit following form if fuel other than natural gas used: PI-02F This form is included for the processing of finished products: PI-18 This form is included for the handling / storage of finished products: PI-03 This form is included for (specify process): N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

g. Crushing and Sizing of Finished Products (Material Processing) h. Storage and Handling of Finished Product i. Other process(es)

This space was intentionally left blank.

Continued on Next Page

Page 1 of 2

Indiana Department Of Environmental Management Office Of Air Quality State Form 52553 (R / 1-07)

Process Information ­ Lime Manufacturing FORM PI-13 Page 2 of 2

PART B: Lime Manufacturing Summary Part B identifies the lime manufacturing details. 3. Unit ID: 5. How many (identical) process units are identified in this form? 6. Maximum Amount of Raw Materials Processed: 4. Installation Date:
(actual or anticipated)

One

More than one (specify number) : tons per hour (tons/hr) tons per year (tpy)

7. Raw Material (as a percentage of

total):

Calcium Carbonate Aragonite Chalk Chalk Coral Marble Seashells Other (specify):

8. Maximum Amount of Lime Produced:

tons per year (tpy)

PART C: Federal Rule Applicability Part C identifies any federal rules that apply to the process. 9. Is a New Source Performance Standard (NSPS) applicable to this source?
If yes, identify the affected emission units and attach a completed FED-01 for each rule that applies.

Yes

No

10. Unit ID(s)

40 CFR Part 60, Subpart HH 40 CFR Part 60, Subpart UUU

Lime Manufacturing Plants Calciners and Dryers in Mineral Industries Yes No 12. Unit ID(s)

11. Is a National Emission Standard for Hazardous Air Pollutants (NESHAP) applicable to this source? If yes, identify the affected emission units and attach a
completed FED-01 for each rule that applies.

40 CFR Part 63, Subpart AAAAA

Lime Manufacturing

13. Non-Applicability Determination: Provide an explanation if the process unit appears subject to a rule (based on the rule title or the source category), but the rule will not apply.