Free Declaration - District Court of Delaware - Delaware

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 1 of 24

EXHIBIT H

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 2 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

SPECIFICATION For APPROVAL

(

) Preliminary Specification

( ) Final Specification

Title
BUYER NAME MODEL NAME

15.1" XGA TFT LCD
SUPPLIER MODEL NAME LG.Philips LCD Co., Ltd. LM151X2-C2TH

SIGNATURE /

DATE

APPROVED BY S.H.Kang /G.Manager REVIEWED BY

DATE

/

I. H. Ahn /S.Engineer PREPARED BY

/

T.K.Kark /S.Engineer

Please return 1 copy for our confirmation with your signature and comments.

Product Engineering Dept. LCD Division LG Electronics Inc.

Revision Ver 1.3

Nov. 25, 1998

Page 1/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 3 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

CONTENTS

NO.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. COVER CONTENTS RECORD of REVISIONS GENERAL DESCRIPTIONS MAXIMUM RATINGS

ITEM

Page
1 2 3 4 5 5 6 10 11 12 13 14 15 16 17 17 18 19~20 21~22

ELECTRICAL SPECIFICATIONS OPTICAL SPECIFICATIONS INTERFACE CONNECTIONS SIGNAL TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR INPUT DATA REFERENCES POWER SEQUENCES MECHANICAL CHARACTERISTICS ENVIRONMENTAL SPECIFICATIONS DESIGNATION OF LOT MARK PACKING FORM PRECAUTIONS APPENDIX 1. OUTLINE DRAWINGS APPENDIX 2. PACKING ASSEMBLY DRAWINGS

Revision Ver 1.3

Nov. 25, 1998

Page 2/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 4 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

Record of Revisions
Revision Version 0.0 0.1 Date April 13, 1998 May 6, 1998 DESCRIPTION Preliminary Preliminary, Update (Changed Interface Connections - Increased VDD Lines, Fixed Interface Connector Model Name, Updated Outline Drawings) Preliminary, Update (Updated Electrical Specifications, Optical Specifications, and Signal Timing Specifications) Preliminary, Update (Updated Power Sequences, Updated Electrical Specifications - Back Light) Preliminary, Update (Changed Environmental Specifications, Changed Outsize Dimensions - Thickness : Refer to Outline Drawings) Preliminary, Update (Updated Optical Specifications) Preliminary, Update (Updated Optical Specifications - Gamma Value) Preliminary, Update ( 1. Updated Optical Specifications - Contrast Ratio, Viewing angle, Cross Talk 2. Updated Signal Timing Specifications Main Clock, Hsync, Vsync 3. Updated Electrical Characteristics - Back Light Life Time) Final, Update (1. Updated Outsize dimensions 2. Updated Electrical Specifications Lamp Kick-Off Voltage) Change the signal timing wave form 1. Change the set-up & hold duration 2. Add viewing angle at C/R 5 C2TH) 1.3 November 25, 1998 Change the model name ( LM151X2LM151X2X2 LM151X2

0.2

June 16, 1998

0.3

June 22, 1998

0.4

June 29, 1998

0.5 0. 6 0.7

July 9, 1998 July 21, 1998 September17, 1998

1.0

October 14, 1998

1.1 1.2

November 16, 1998 November 20, 1998

Revision Ver 1.3

Nov. 25, 1998

Page 3/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 5 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

Revision Ver 1.3

Nov. 25, 1998

Page 4/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 6 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

1. General Descriptions

The LG Electronics model LM151X2 LCD is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Tube(CCFT) back light system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally white mode. This TFT-LCD has a 15.1 inch diagonally measured active display area with XGA resolution(768 vertical by 1024 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors. LM151X2 has been designed to apply the CMOS logic level interface. The LM151X2 LCD is intended to support applications where high brightness, wide viewing angle, high color saturation, and high color depth are very important. In combination with the vertical arrangement of the sub-pixels, the LM151X2 characteristics provide an excellent flat panel display for office automation products such as monitors.

Timing Control Block

Source driver
1 1 1024

General Display Characteristics The following are general features of the model LM151X2 LCD; Active display area 15.1 inches(38cm) diagonal Outsize dimensions 352.6w * 265.0h * 18.5t(typ)mm(Without Inverter and User Connector) Pixel pitch 0.30 mm × 0.30 mm Pixel format 1024 horiz. By 768 vert. pixels RGB vertical stripe arrangement Color depth 6-bit, 262,144 colors Display operating mode transmissive mode, normally white Surface treatments hard coating(3H), anti-glare treatment of the front polarizer

Revision Ver 1.3

CN1 connector CN2 CN3 Nov. 25, 1998

Gate Driver

TFTTFT- LCD (1024× (1024 ×768)
768

Power Block

Ass'y Backlight Ass y

Page 5/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 7 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

2. Maximum Ratings

The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit. Table 1 Parameter symbol VDD IBL TOP TST ABSOLUTE MAXIMUM RATINGS Min. 0 0 -20 Values Max. +3.6 9.0 +50 +60 Units VDC mArms Notes at 25 2 1

Power Input Voltage Lamp Current Operating Temperature Storage Temperature Note:

1. The Relative Humidity must not exceed 95% non-condensing at temperatures of 40 or less. At temperatures greater than 40, the wet bulb temperature must not exceed 39. 2. Current shall be measured at ground line.

3. Electrical Specifications

The LM151X2 requires two power inputs. One input is employed to power the LCD electronics and to drive the voltages to drive the TFT array and liquid crystal. And the second input for the backlight CCFL, is typically generated by an inverter. The inverter is an external unit to the LCD. Table 2 Parameter ELECTRICAL CHARACTERISTICS: Values Symbol Min. Typ. Max. VDD IDD IDDI VIH VIL VBL IBL 3.15 0.7×VDD -0.5 685 3.0 1290 1660 3.3 500 585 8.0 3.45 800 1,500 VDD + 0.5 0.3×VDD 570 9.0 880 1145 -

Units VDC mA mA V V VRMS mA VRMS VRMS VRMS VRMS

Notes 1 1, 2 7 1 1

MODULE : Power Supply Input Voltage Power Supply Input Current Power Supply Kick Off Current Data Input High Voltage Data Input Low Voltage BACK LIGHT : Back light Input voltage Backlight Input Current Lamp Kick-Off Voltage

KHz FBL Operating Frequency 50 30 80 hours Life time 40,000 25,000 6 Notes: 1. All values shall be measured at the user connection. 2. The input current shall be measured at VDD of 3.3V at 25, refresh rate of 60Hz, and clock frequency of 65MHz under 9 gray pattern. 3. The backlight input current shall be measured at the ground cable and does not include loss of external inverter. 4. Voltages at both ends of the lamp. 5. Voltages at secondary side of transformer using the balancing capacitor, 22pF in inverter. These voltages can be changed with customer's own design of inverter. 6. The life time is defined as the time at which brightness of lamp is 50% compare to that of initial value at the typical lamp current. 7. Power supply kick off current means power supply input current at the moment of LCM power on. This current is higher than the current at the normal operating condition and it lasts for 50~100ms. Revision Ver 1.3 Nov. 25, 1998

3 At 25±2 At 0±2 4 At 25±2 At 0±2 5

Page 6/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 8 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

4. Optical Specifications

Optical characteristics are determined after the unit has been `ON' and stable for approximately 30 minutes in a dark environment at 25. The values specified are at an approximate distance 50cm from the LCD surface at a viewing angle of and equal to 0° and aperture 1 degree. The test equipment is PhotoResearch Prichard SpectroRadiometer Model 1980B-SC or equivalent. The input signal voltage and timing specification are VDD of 3.3V and VESA XGA @60Hz respectively. The input current of backlight is 8mA(FBL = 50KHz) at the ground terminals. Table 2 Parameter OPTICAL CHARACTERISTICS Min. 150 170 0.600 0.310 0.270 0.570 0.110 0.070 0.290 0.310 55 55 40 40 70 70 50 50 Values Typ. 200 200 50 20 30 0.630 0.340 0.300 0.600 0.140 0.100 0.320 0.340 60 60 45 45 75 75 55 55 2.5 2.5 % 6 7 Max. 30 80 30 50 0.660 0.370 0.330 0.630 0.170 0.130 0.350 0.370 degree, ° 5 cd/m2 % msec Units Notes 1 2 3 4

Symbol CR SBWH SBV Tr TrR TrD xR yR xG yG xB yB xW yW

Contrast Ratio Average Brightness, white Brightness Variation Response Time Rise Time Decay Time

CIE Color Coordinates Red Green Blue White Viewing Angle by CR 10 x axis, right (=0º) x axis, left(=180º) y axis, up(=90º) y axis, down (=270º) Viewing Angle by CR 5 x axis, right (=0º) x axis, left(=180º) y axis, up(=90º) y axis, down (=270º) Cross talk Horizontal Vertical Gamma value

Revision Ver 1.3

Nov. 25, 1998

Page 7/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 9 of 24

LG Electronics Inc.
Product Specification (final) Notes

LM151X2-C2TH Liquid Crystal Display

1. Contrast Ratio (CR) is defined mathematically as: (Surface Brightness with all white pixels) (Surface Brightness with all black pixels) Contrast ratio shall be measured at the center of the display (Location 1). 2. Average Brightness is the average of brightness value at location 1 to 5 with all pixels displaying white. B(AVE) = B1 + B2 + B3 + B4 + B5 5

3. The variation in surface brightness, SBV is defined as : Maximum (B1, B2, ....B13) - Minimum (B1, B2, ....B13) × 100(%) Average (B1, B2, .... B5) Where B1 to B13 are the brightness with all pixels displaying white at 13 locations.
256 512 768 20mm ( pixel) 20mm 6 2 13 1 5 11 10 7 3 384 4 9 576 8 192

12

4. The response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white".

TrR
%
100 90

TrD

Optical Response
10 0

white black

white

Revision Ver 1.3

Nov. 25, 1998

Page 8/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 10 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

5. Viewing angle is the angle at which the contrast ratio is greater than 10.
= 0
yu z A

= 90
(12:00)



= 180
(9:00)

xl

= 0
(3:00)

xr

TFT LCD MODULE

z'

yd

= 270 (6:00)

6. Cross talk shall be measured at two locations. Brightness at pattern A - Brightness at pattern B Brightness at pattern A Pattern B (Background:Gs(S)=31, Rectangular:Gs(S)=0 & 63) [256, 192] [512, 96] [896, 384] 2 2 [768, 576] Vertical Crosstalk shall be measured at the location 1 and horizontal crosstalk shall be measured at the location 2. 1 1

Crosstalk Ratio =100×

Pattern A (Mid-gray : Gs(S)=31)

Revision Ver 1.3

Nov. 25, 1998

Page 9/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 11 of 24

LG Electronics Inc.
Product Specification (final) 7. Gamma values shall be measured at the center location. Relative Brightness(%) min 2.3 5.4 10.4 22.8 41.1 66.7 100 max 0.67 1.8 4.3 9.4 20.4 34.8 55.1 82.7 100

LM151X2-C2TH Liquid Crystal Display

n 0 1 2 3 4 5 6 7 8

Gs(S) 0 7 15 23 31 39 47 55 63

Remark

Revision Ver 1.3

Nov. 25, 1998

Page 10/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 12 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

5. Interface Connections
This LCD employs three interface connections, a 41 pin connector is used for the module electronics and two connectors, a three pin connector, are used for the integral backlight system. The electronics interface connector is a model DF9B-41P-1V manufactured by Hirose. The pin configuration for the connector is shown in the table below. Table 3 MODULE CONNECTOR PIN CONFIGURATION

Pin Symbol Description Pin Symbol Description GND 1 System Ground. Note 1 DCLK Data Input Clock 2 GND 3 System Ground Hsync Hsync. Horizontal Sync Signal 4 Vsync 5 Vsync. Vertical Sync Signal 6 GND System Ground 7 GND System Ground 8 GND System Ground 9 R0 Red data 0 (LSB) 10 R1 Red data 1 11 R2 Red data 2 12 GND System Ground 13 R3 Red data 3 14 R4 Red data 4 15 R5 Red data 5 (MSB) 16 GND System Ground 17 GND System Ground 18 GND System Ground 19 G0 Green data 0 (LSB) 20 G1 Green data 1 21 G2 Green data 2 22 GND System Ground 23 G3 Green data 3 24 G4 Green data 4 25 G5 Green data 5 (MSB) 26 GND System Ground 27 GND System Ground 28 GND System Ground 29 B0 Blue data 0 (LSB) 30 B1 Blue data 1 31 B2 Blue data 2 32 GND System Ground 33 B3 Blue data 3 34 B4 Blue data 4 35 B5 Blue data 5 (MSB) 36 GND System Ground 37 DE Data Enable Signal 38 VDD Power Supply for LCD Module 39 VDD Power Supply for LCD Module 40 Power Supply for LCD Module VDD 41 Power Supply for LCD Module VDD Notes: 1. All GND(ground) pins should be connected together and to Vss which should also be connected to the LCD's metal frame. 2. All VDD(power input) pins should be connected together.
TOP SIDE

PIN 1

PIN 2

Back SIDE OF LCM
BOTTOM SIDE
PIN 41 PIN 40

The backlight interface connector is a model BHR-03VS-1, manufactured by JST. The mating connector part number is SM02(8.0)B-BHS-1-TB or equivalent. The pin configuration for the connector is shown in the table below. Table 4 BACKLIGHT CONNECTOR PIN CONFIGURATION Pin Symbol Description Notes 1 HV Lamp power input 1 2 NC No connect 3 LV Ground 2 1. The input power terminal is colored pink. Ground pin color is light pink. 2. The backlight ground should be common with Vss.

Notes:

Revision Ver 1.3

Nov. 25, 1998

Page 11/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 13 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

6. Signal Timing Specifications
Parameter Main Clock Frequency High duration Low duration Rise Time Fall Time Set-up duration Hold duration Symbol Value Min. Typ. Max. Units MHz ns ns ns ns ns ns for fCLK for fCLK note 1 Notes

fCLK(=1/tCLK) 63.0 65.0 67.0 0.45 tCLK 0.5 tCLK 0.55 tCLK twcH 0.45 tCLK 0.5 tCLK 0.55 tCLK twcL trCLK 8 8 tfCLK tSD tHD 3.5 3.5 -

Data (RGB data including sync) Hsync

Period Pulse Width

tHP tWH tVP tWV tSI tHI tHBP tHFP tVBP tVFP tHC tHV

16.5 1056 8 777 1 5.0 5.0 8 1024 8 5 768 1 tCLK-10 -

20.7 1344 136 16.7 806 6 160 1024 24 29 768 3 -

1368 840 1024 768 twcL tHP-tWH

clock clock msec lines lines ns ns clock clock clock lines lines lines ns ns for fCLK for fCLK

Vsync

Period Pulse Width Set-up duration Hold duration Horizontal Back Porch Horizontal Active Horizontal Front porch Vertical Back Porch Vertical Active Vertical Front porch

Data Enable

Hsync- Clock phase difference Hsync-Vsync phase difference Notes:

1. All data input shall be latched at falling edge of data clock.

Revision Ver 1.3

Nov. 25, 1998

Page 12/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 14 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

7. Signal Timimg Waveforms
tWCH
0.7VDD 0.5VDD 0.5VDD 0.7VDD 0.3VDD

tCLK Main Clock Data
(R0~R5, G0~G5, B0~B5) Invalid Data
0.5VDD

tWCL

tfCLK
0.7VDD 0.3VDD

trCLK
0.7VDD 0.3VDD

0.3VDD

tSD tHD
Invalid Data

tHI

tSI

DataData Enable Main Clock tHC Hsync tHV Vsync tHP tWH Hsync DataData Enable tWV Vsync DataData Enable tVBP tVFP tHBP tHFP

tVP

Revision Ver 1.3

Nov. 25, 1998

Page 13/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 15 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

8. Color Input Data References

The brightness of each primary color(red, green and blue) is based on the 6-bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input. Table 5 COLOR DATA REFERENCE Color MSB Black Red(63) Green(63) Blue(63) Cyan Magenta Yellow White Red(0) Red(1) Red(2) Red(61) Red(62) Red(63) Green(0) Green(1) Green(2) Green Green(61) Green(62) Green(63) Blue(0) Blue(1) Blue(2) Blue Blue(61) Blue(62) Blue(63) Bright 0 1 0 0 0 1 1 1 0 0 0 : 1 1 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 1 0 0 0 1 1 1 0 0 0 : 1 1 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 1 0 0 0 1 1 1 0 0 0 : 1 1 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 1 0 0 0 1 1 1 0 0 0 : 1 1 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 1 0 0 0 1 1 1 0 0 1 : 0 1 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 Red LSB 0 1 0 0 0 1 1 1 0 1 0 : 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 Input Color Data Green MSB LSB 0 0 1 0 1 0 1 1 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : 0 0 0 0 0 1 : 0 1 1 0 0 0 : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : 0 0 0 0 1 0 : 1 0 1 0 0 0 : 0 0 0 Blue MSB 0 0 0 1 1 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 1 1 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 1 1 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 1 1 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 1 1 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 1 : 0 1 1 LSB 0 0 0 1 1 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 1 0 : 1 0 1

R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0

Basic Colors

Dark

Red Bright Dark

Bright

Dark

Revision Ver 1.3

Nov. 25, 1998

Page 14/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 16 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

9. Power Sequences

90% Power Supply for VDD 0V 10%

90% 10%

T1

T2

T5

T6

T7

Interface Signal, Vi (Digital RGB signal, Vsync, Hsync, DE, Clock) 0V T3

Valid

T4

Power Supply for Backlight 0V Inverter

! ! ! !

T1, T6 : 10 ns ~ 20 ms. T2, T5 : 50 ms (max.) T3, T4 : 300 ms (min.) T7 : 500ms (min.)

Notes: 1. Please avoid floating state of interface signal at invalid period. 2. When the interface signal is invalid, be sure to pull down the power supply for LCD VDD to 0V. 3. BackLight inverter power must be turn on after power supply for LCD and interface signal are valid.

Revision Ver 1.3

Nov. 25, 1998

Page 15/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 17 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

10. Mechanical Characteristics

The chart below provides general mechanical characteristics for the model LM151X2 LCD. refer to appendix 2 regarding the detailed mechanical drawing of the LCD module. Parameter Outside dimension Width Height Thickness Bezel area Width Height Active area Width Height Weight Front surface of LCD Value 352.6 (typ) 265.0 (typ) 18.5 (typ) 311.2 234.4 307.2 230.4 1500(typ) 1600 (max) Hard coating 3H. Anti-glare treatment of the front polarizer Symbol mm Notes

Please

mm

mm gram -

Revision Ver 1.3

Nov. 25, 1998

Page 16/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 18 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

11. Environmental Specifications
No 1 2 3 Test ITEM Temperature Humidity Operating Non-operating Operating Non-operating Altitude 0 ~ 50 -20 ~ 60 20% ~ 80% RH (non-condensing) 5% ~ 95% RH (38.7 maximum wet bulb temperature) Operating : 12,000ft Storage : 40,000ft Waveform : Random Vibration level : 1.0G RMS Bandwidth : 10~200Hz Duration : X, Y, Z, 20 min one time each direction Shock level : 100G Waveform: half sine wave, 2ms Direction : ±X, ±Y, ±Z one time each direction Conditions

4

Vibration test (non-operating)

5

Shock test (non-operating)

Revision Ver 1.3

Nov. 25, 1998

Page 17/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 19 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

12. Designation of Lot Mark
a) Lot Mark A B C D E F G H I J K L

A, B : DIVISION CODE C, D, E : MODEL CODE F : YEAR G : MONTH H, I, J, K, L : SERIAL NO. Note : 1. YEAR YEAR Mark 89 9 90 0 91 1 92 2 93 3 94 4 95 5 96 6 97 7 98 8 99 9

2. MONTH MONTH Mark Jan. 1 Feb. 2 Mar. 3 Apr. 4 May 5 Jun. 6 Jun. 7 Aug. 8 Sep. 9 Oct. 0 Nov. N Dec. D

b) Location of Lot Mark Serial NO. Is printed on the label. The label is attached to the backside of the LCD module. This is subject to change without prior notice.

13. Packing Form
a) Package quantity in one box : 8 pcs b) Box Size : 587mm×408mm×378mm Note : 1. Please, refer to appendix 3 regarding the detailed packing assembly drawing.

Revision Ver 1.3

Nov. 25, 1998

Page 18/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 20 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

14. PRECAUTIONS
Please pay attention to the followings when you use this TFT-LCD module with Back-light unit. 1)You must mount Module using mounting holes arranged in 4 corners. 2) Be sure to turn off the power when connecting or disconnecting the circuit. 3) Note that the polarizers are easily damaged. Pay attention not to scratch or press this surface with any hard object. 4) When the LCD surface become dirty, please wipe it off with a soft material. (ie. cotton ball) 5) Protect the module from the ESD as it may damage the electronic circuit (C-MOS). Make certain that treatment person's body are grounded through wrist bend. 6) Do not disassemble the module and be careful not to incur a mechanical shock that might occur during installation. It may cause permanent damage. 7) Do not leave the module in high temperatures, particularly in areas of high humidity for a long time. 8) The module not be expose to the direct sunlight. 9) Avoid contact with water as it may a short circuit within the module. 10) Do not apply invalid signal, especially very high frequency data clock and Hsync. Invalid signal causes improper shutdown of DC/DC converter in LCM or permanent damage to LCD module. (If DC/DC converter in LCM is in shutdown state, LCM shows only white screen. Then please turn off and on once LCM power.) 11) If the LCM displays the same pattern continuously for a long period of time, it can be the image sticking to the screen.

Revision Ver 1.3

Nov. 25, 1998

Page 19/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 21 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

15. APPENDIX 1 : Outline Drawings

265.0

Revision Ver 1.3

Nov. 25, 1998

Page 20/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 22 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

Revision Ver 1.3

Nov. 25, 1998

Page 21/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 23 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

16. APPENDIX 2 : Packing Assembly Drawings

Revision Ver 1.3

Nov. 25, 1998

Page 22/22

Case 1:04-cv-00343-JJF

Document 646-9

Filed 05/02/2007

Page 24 of 24

LG Electronics Inc.
Product Specification (final)

LM151X2-C2TH Liquid Crystal Display

Revision Ver 1.3

Nov. 25, 1998

Page 23/22