Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 1 of 14
DD Form 1423-2: Contract Ota Requirements List CONTRACT DATA REQUIREMENTS LIST (2 DataItems)
2 Dam ~ns)
Form Approved OMB No. 0704-0188
A. CONTRACT LINE ITEM NO. 0003
Bo EXHIBIT E
C. CATEGORY: TM OTHER CONFIGURATIONMGMT F. CONTRACTOR
D. SYSTEM/ITEM AUTOMATED TECHNICAL CONTROL C003
TDP E. CONTRACT/PR NO. N00600-94-C-0389
Engineering Change Proposal
DI-CMAN-B0639A 17 Apt 92 of
7. DD2~0 REQ 10. FREQUENCY
S.O.W.3.4.1
14.
PMW 152
DISTRIBUTION
LT
8. APPCODE
As required
As required
ADDRESSEE
A
16. REMARKS
As required PMW152-21F CNCTC N622
Dralt
2 1
3
1. DATA !TEMNO.
C004
Request for Deviation
DI-CMAN-80640A 17 Apr 92 of
7. DD250 REQ 10. FREQUENCY
S.O.W. 3.4.4 As required
PMW 152
LT
6. APPCODE
As required
11, AS OF DATE
A As Required PMW152-21F CNCTC N622
Dr~ft
Repr 2 1
15.
TOTAL-->
G. PREPARED BY
H. DATE
L. APPROVED BY
3 J. DATE
DD Form 1423-2,
10591183
JUN 90
Previous editions
are obsolete
Page 5 of
36 Pages
Attachment
6
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 2 of 14
DD Form 1423-2: Contract~zta Requirements List CONTRACT DATA REQUIREMENTS LIST (2 Data Items)
(2 Data Ores)
Form ATproved OMB No. 0704-0188
A. CONTRACT LINEITEM NO, 0003 D. SYSTEM/ITEM AUTOMATED TECHNICAL CONTROL
1. DATAITEM NO,
EXHIBIT F
C. CATEGORY: TM OTHER CONFIGURATIONMGMT F. CONTRACTOR
TDP E, CONTRACT/PR NO. NOO600-94*CoO389
C005
Request for Waiver
DI-CMAN-80641Aof 17 Apr 92
?. DD 260 REO
S,O,W. 3.4.4
PMW152
LT
8. APPCODE
As required
11. AS OF DATE
As required As required iPMW 152-21F !CNCTC N622 12 1
A
3
1,DATAITEMNO.
CONTRACT REFERENCE
6. RECIUIPJNG OFFICE
7. DD 260 REQ
14,
DISTRIBUTION
8, APP CODE
ADDRESSEE
Intentionally left blank.
16. TOTAL ..........
>
iG, PREPARED BY
H, DATE
L. APPROVED BY
,,1
J, DATE
DD Form 1423-2, Attachment 6
JUN 90
Previous editions
are obsolete
Page 6 of
36 Pages
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 3 of 14
DD Fortn 1423-2: Contract Ota Requirements List CONTRACT DATA REQUIREMENTS LIST (2 DataItems)
(2 Data Ons)
Form Approved OMB No. 0704-0188
A. CONTRACT LINE ITEM NO. 0003
B. EXHIBIT G
C, CATEGORY: TM OTHER SOFTWARE CONTRACTOR
D. SYSTEM/ITEM AUTOMATED TECHNICAL CONTROL D001
TDP E. CONTRACWPR NO, N00600-94-C-0389
Doc. of Commercially Available or Priv. Dev.
DI-E-7141 18 Jan 85 of
7. DD250 REQ
S.O.W.3.3.1
PMW 152
LT
8, APPCODE
0 T~me
11. AS OF DATE
180 DAC NONE
COPIED
16. REMARKS
Biock 4: Tailor DI-E-7141 as follows: a. Change block 3.2 all after satisfactory to reed "for its intended use. If approved..." b. Delete block 7.1 in its entirety. ~ co Delete from block 7.2 "as defined in DoD-STD-1467 (AR). Block 12: Government will review and comment NLT 30 DAR.
PMW152-21F CNCTC N622
2 1
15. TOTAL 1. DATA ITEMNO*
3 Manual
D002
Computer System Operator's
Manual
NMS Operator's
6. REQUID;NG OFRCE
DI-MCCR-80018A 29 Feb 88 of
S.O.W, 3,8.1 ONE/R SeeBlock 16
PMW 152
10. FREQUE]~CY b, COPIED 8. APPCODE 11. AD OF DATE 13. DATEOF SUBSEQUENT SUBMISSION
30 DARC
16. REMARKS
D~aft
Dopr
B~^~u12: Six (6) months ADC option exercise. or Block 13: Government will review and comment or approve NLT 3O DAR.
PMW152-21F CNCTCN622.
3 1
4 1
15, TOTAL
G, PREPARED BY
H. DATE
L APPROVED BY
4 5 J. DATE
DD Form 1423-2,
10591183
JUN 90
Previous editions
are obsolete
Page 7 of
36 Pages
Attachment
6
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 4 of 14
DD Form 1423-2: Contract~ta Requirements List (2 DataOms) Form Approved CONTRACT DATA RE(~-01RENIENTS LIST
(2 Data Items) OMBNo. 0704-0188
IA, D.
CONTRACT LINEITEM NO. 0003 SYSTEM~TEM AUTOMATED TECHNICAL CONTROL TITLE DATA OF ITJE~
EXHIBIT H
C. CATEGORY: TM OTHER SOFTWARE F. CONTRACTOR
TDP E. CONTRACT/PR NO. N00600-94-C-0389
1. DATA NO. IT~ D003
Software User's Manual
6. REQUIPJNG OFFICE
DI-MCCR-80019A of 29 Feb 88
10,
S.O.W. 3.8.1
FREQUENCY
PMW 152
AS REQ
I8, APP CODE 11, AS OF DATE
See Block 16 30 DARC
Block 12: Six (6) months ADCor option exercise. Block 13: Government will review and comment or approve 30 DAR
PMW 152-21F CNCTCN622
NLT
3 1
4 1
4
1. DATA IT~ NO.
5
D004
Software Programmer's Manual
6. REQUIRIf~GOFFICE
DI-MCCR-80021A of 29 Feb 88
7. DD 250 REQ
S.O.W. 3.8.1
PMW 152
10. FREQUENCy
LT
8. APPCODE
AS REQ
11. AS OF DATE
See Block 16
A 30 DARC
16. REMARKS
Block 12: Six (6) monthsADC option exercise. Government or will review and comment approve NLT30 DAR. or
~MW 152-21F CNCTCN622
3 1
4 1
4
G. PREPARED BY H. DATE L. APPROVEDBY
5
J. DATE
DD Form 1423-2,
10591183
JUN 90
Previous editions are obsolete
Page 8 of 36 Pages
Attachment 6
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 5 of 14
DD Form 1423-2: Contract~ta Requirements List (2 Data Ores) Form Approved CONTRACTDATA REQUIREMENTSLIST
(2 Data Items) OMB No. 0704-0188
A. CONTRACT LINEITEM NO. 0003
B. EXHIBIT I
C. CATEGORY: TM OTHER SOFTWARE F. CONTRACTOR
D. SYSTEMfiTEM AUTOMATED TECHNICAL CONTROL 1. DATA ITE~,~ NO. D005 OFDATA Software
TDP E. CONTRACT/PR NO. N00600-94-C-0389 Program Maintenance Manual
DI-MCCR-80317 of 12 Feb 87
6, REOU]FJNG OFFICE PMW 152 12. DATE FIRST OF SUBMISSION AS REQ See Block 16 30 DARC
8, APP CODE
A
Block 12: Six (6) monthsADC option exercise. Government or will review and comment approve NLT30 DAR or
PMW 152-21F CNCTCN622
3 1
4 1
4
1. DATA ITET~ D006 SUBTITLE
5
Job Manual
6. REQUIRING OFFICE PMW 152
DI-ILSS-80559 of 7 Apr 88 7. DD260 REQ LT E, APP CODE A
S,O.W. 3.8
0 Time
See Block 16
30 DARC PMW 152-21F Block 12: Due upon completion of installation. Government will and comment or approve NLT 45 DAR. Tailor DI-ILSS-80559 as follows: a. Add block 7.3: This DID is for the identification and procurement of the Technical Manual(s} required for CFE installed as part of this procurement. This information may be contained in one or several binders but shall include all information necessary to perform, but not limited to, the operational, maintenance end fault isolation functions of the system. review
CNCTCN622
EACH SITE
3 1 7
4 1 28
15. TOTAL .......
¯
11
33
G. PREPARED BY
H. DATE
L. APPROVED BY
J. DATE
DD Form 1423-2, Attachment 6
JUN 90
Previous editions are obsolete
Page ~9 of 3--6 Pages
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 6 of 14
DD Fortn 1423-2: ContractOta Requirements List CONTRACT DATA REQUIREMENTS LIST (2 DataItems)
(2 Data Ons)
Form Approved OMBNo. 0704-0188
A. CONTRACT LINE ITEM NO. 0OO3
B. EXHIBIT J
C. CATEGORY: TM F. OTHER LOGISTICS CONTRACTOR
D, SYSTEM/ITEM AUTOMATED TECHNICAL CONTROL E001
TDP E. CONTRACT/PRNO. N006OO-94.C.0389
Integrated Support Plan
DI-ILSS-80395 of 3 Aug 87 8768
S.O.W, 3,4.5
PMW 152
90 DAC
8. APPCODE 11. AS OF DATE
b* COPIES
AN
16. REMARKS
30 DARC
Draft
Government will
review and comment or approve NLT30 DAR.
PMW 152-21F CNCTCN622
3 1
6 1
4
E002
7
Maintenance Plan
5, CONTRACT REFERENCE
DI-ILSS-50816 of 24 May 89
S.O.Wo3,4.5
10. FREQUENCY 12. DATEOF RRST SUBMISSION
PMW 152
ONFJR
8, APPCODE 11. AS OF DATE
150 DAC
COPIES
AN 30 DARC
16, RF.J~ARKS Reg
Government will
review and comment approve NLT30 DAR. or
PMW 152-21F CNCTCN622
3 1
6 1
4 i7
G° PREPAREDBY
H. DATE
l APPROVED BY
J. DATE
DD Form 1423-2, JUN 90
1059/183
Previous editions are obsolete
Page
10 of 36 Pages
Attachment 6
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 7 of 14
OD Form 1423-2: Contrac~_ ta Requirements List (2 DataQms) Form APproved CONTRACTDATA REQUIREMENTSLIST
(2 Data Items)
OMB No. 0704-0188
A, CONTRACT ITEM NO. LINE 0003 D. SYSTEM/ITEM AUTOMATED TECHNICAL CONTROL E003
EXHIBIT
C. CATEGORY: TM OTHERLOGISTICS F. CONTRACTOR
TDP NO. E, CONTRACT/PR N0600-94-C-0389
Proposed Spare Parts List
REQUIRING OFFICE
DI-ILSS-80134A 6 Nov 90 of
7, DD 250 REQ
S,O.W, 3.2.5
10, FREQUENCY
PMW152
LT
8. APPCOOE
0 Time
See Block 16
ADDRESSEE
Bloc~ 12: Six (6) monthsafter contract award or option exercise.
PMW152-21F CNCTC N622
0 1
0 1
1
DATAITET~ NO.
1
EO04
Spare Parts Usage Report
6, REQUIRINGOFFICE
DI-ILSS-80483of 30 Oct 87
S.O.W. 3,2.5 SeeBlock 16
PMW152
Quarterly
8. APP CODE
SeeBlock 16 Block 12: Sabmlt 15 days after end of first quarter of operational status, Block 13: Sabmit 15 days after end of each quarterly reporting period. Block 2: Sabmit separate report for each site. PMW 152-21F CNCTC N622 2 1
G. PREPARED BY
H, DATE
L. APPROVED BY
3 J. DATE
DD Form 1423-2, Attachment 6
JUN 90
Previous editions
are obsolete
Page
I___~1of 3~6Pages
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 8 of 14
DD Form 1423-2: Contract~kta Requiretnents List CONTRACT DATA REQUIREMENTS LIST (2 Data Items)
(2 Data Ons)
Form Approved
OMB 0704-0188 No.
A. CONTRACT ITEM NO. UNE 0003
B. EXHIBIT L
C. CATEGORY: TM OTHER LOGISTICS F. CONTRACTOR
3. SUBTITLE
D. SYSTEM/ITEM AUTOMATED TECHNICAL CONTROL E005 Failure
TDP E. CONTRACT/PR NO. N0600-94-C-0389
Summaryand Analysis Report
DI-RELJ-80255 17 Oct 86 8768 of
S,O.W.3.4,5
FREQUE]~C¥ DATE OF FIRST SUBMISSION
PMW152
Quarterly
8, APP CODE 11. AS OF DA'~E
SeeBlock 16 SeeBlock 16
16,
REMARKS
Block 12: Submit 10 days after the first full quarter system operation. Block 13: Submit the 10th of every quarter. Block 2: Submit separate report for each site.
PMW152-21F CNCTC N622
3 1
8, APPCODE
11, AS OF DATE
13. DATE QFSUESEQUENT SUBMISSION
REMARKS
Intentionally left blan~.
G. PREPARED BY
H, DATE
L. APPROVED BY
J, DATE
DD Form 1423-2, Attachment 6
JUN 90
Previous editions
are obsolete
Page
12 of 36 Pages
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 9 of 14
DD Fortn 1423-2: ContractOta Requirelnents List CONTRACT DATA REQUIREMENTS LIST (2 Data Items)
(2 Data Ons)
Form Approved OMB No. 0704-0188
~.CONTRACT~NEITEM NO. 0~3
B. EXHIBIT M
CATEGORY: TM OTHER TRAINING F. CONTRACTOR
D. SYSTEM,qTEM AUTOMATED TECHNICAL CONTROL
TDP E. CONTRACT/PR NO, NO0600-94.C-0389 Training Plan
REQUIRINGOFRCE
DI-|LSS-80143 7 Apt86 8768 of
S.O.W, 3.7.1 - 3,7.5
FREQUENCY
PMW 152
ONE/R
8, APPCODE 11, AS OF DATE
4 Mos ADC 30 DARC
COPIES
AN
16. REMARKS
Block 13: Government will 30 DAR.
review and comment or approve NLT
PMW152-21F CNCTC N622
3 1
3 1
15. TOTAL
4
4
Lesson Plan
DI-ILSS-81095 5 Dec91 of
S.OoW. 3.7.1 - 3.7,5
FREQUENCY
PMW 152 See Block 16
ONF-JR
8. APPCODE 11. AS OF DATE
13. DATE OF SUBSEQUENT
AN See Block 16
16, REMARKS ! Reg
Block 12: Submit 90 days prior to start of first scheduled course. Block 13: Government will review and comment or approve NLT 30 DAR. Revisions due NLT 30 DARC.
PMW152-21F CNCTC N622
3 1
3 1
G. PREPARED BY
H. DATE
L. APPROVED BY
4 4 J. DATE
DD Form 1423-2, Attachment 6
JUN 90
Previous
editions
are obsolete
Page. 13 of 36 Pages
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 10 of 14
DDForm 1423-2: Contract Ota Requb'ements List (2 Data l~s) CONTRACT DATA REQOIREMENTS LIST !UIREMENT~ Form Approved OMB No. 0704-0188 (2 DataItems)
A. CONTRACT ITEM NO. UNE 0903
B. EXHIBIT N
C. CATEGORY: TM iF. OTHER TRAINING CONTRACTOR
D. SYSTEM/ITEM AUTOMATED TECHNICAL CONTROL
TDP E. CONTRACWPR NO. N00600-94-C0389 Trainee Guide
CONTRACT REFERENCE
DI-ILSS-81100 5 Dec 90 8768 of
7, DD250 REQ
S.O,W, 3,7.1 - 3.7,5
10. FREQUEnCy 12. DATEOF RRSTSUBMISSION
PMW 152
LT
8. APPCODE
ONEUR
11. AS OF DATE
See Block 16 30 DARC PMW152-21F CNCTC N622
Drml Reg
AN
Ropr
Block 12: Submit 90 days prior to start of first scheduled course. Block 13: Government will review and comment or approve NLT 30 DAR, Revisions due NLT 30 DARC. *Block 14: Provide one copy per student plus two master copies at each site,
3 1
3 1
4 On-the-Job Training Handbook
4
DI-ILSS-81101 5 Dec90 of
S,O,W. 3,7.2 - 3.7.3
10. FREQUENCY
PMW 152 See Block 16
COPIES
ONFJR
8. APPCODE 1. AS OF DATE
A
DATE OF SUBSEQUENT SUBMISSION
30 DARC Government will review and comment or approve NLT 30 DAR. Block 12: Six (6) months ADCor option exercise. *Block 14: Provide one copy per student plus two master copies at each site, PMW152-21F CNCTC N622 3 1 3 1
Repr
15. TOTAL
G. PREPARED BY
H. DATE
L. APPROVED BY
4 4 DATE
DD Form 1423-2,
10591183
JUN 90
Previous editions
are obsolete
Page
14 of 36 Pages
Attachment
6
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 11 of 14
Requirements List (2 Data DD Form 1423-2: Contract CONTRACT DATA REQUIREMENTS LIST Form Approved (2 DataItems) OMBNo. 0704-0188
A. CONTRACTUNE ITEM NO. 0003
B. EXHIBIT O
C. CATEGORY: TM OTHER TESTING F. CONTRACTOR
D. SYSTEM/iTEM AUTOMATED TECHNICAL CONTROL
TDP E. CONTRACT/PR NO. N00600-94-C-O389
G00t
Cutover Plan
REQUIRING OFFICE
DI-MGMT-80355of 7 May 87
PMW 152
LT
0. APPCODE
EEODIRED
See Block 16
! 11. ASOF DATE 13. DATE OF SUBSEQUENT
30 DARC
REMARKS
Block 12: Draft due 4 monthsafter contract. Government will review and comment within 30 days. Tailor DI-MGMT-80355 as follows: a. Deleteblock 10 in its entirety. b. Addthe following: 10.1 TheCutoverPlan will take into acccount facets of the all program will consist of the following parts: and a. Concept b. Schedule c. Management d. Site cutover operation sheets e. Removal replaced equipmentand materials of G001 Cutover Plan (cont.)
5, CONTRACT REFERENCE
PMW 152-21F CNCTCN622
4 1
4 1
15. 0, SUB~TLE
TOTAL-->
5
5
7, DD250 REQ
14.
DISTRIBUTION b, COFIES
8. APPCODE
11, AS OF DATE
16. EMARKS R (Tailoring of DI-MGMT-80355 conL) f. Government participation requirements Block 2: Submitseparateplan for eachsite. 10.2 Part 1 Concepts: This part shall contain details of the cutover plan concept. It shall include information explaining the cutover impact on other parts of the systemand impact of subsequent cutover in other parts of the systemon this particular site. Theconcept should recognize a phasedsequence the cutover expressing the contractor's intent and of general methodof maintaining the system through a gradual series of transitions from the existing to the final configuration. 10.3 .Part II Schedule: This part shall identify anddescribelink andcircuit cutover schedule. This scheduleshall be divided into four general "periods": ~. PREPARED ........... BY H. DATE L. APPROVED BY
15,
TOTAL-->
J. DATE
DD Form 1423-2, JUN 90
' 10591183
Previous editions are obsolete
Page
15 of 36 Pages
Attachment 6
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 12 of 14
DD Form 1423-2: Contract J~a Requirements List ) CONTRACT DATA REQUIREMENTS LIST (2 Data Items)
(2 Data IOs Form Approved OMB 0704-0188 No.
A. CONTRACT LINE ITEM NO. 0003
B. EXHIBIT P
C. CATEGORY: TM OTHER TESTING F. CONTRACTOR
D. SYSTEM/ITEM AUTOMATED TECHNICAL CONTROL G001
TDP E. CONTRACT/PR NO. N00500-94-C-0389
Cutover Plan (cont.)
¯ APP CODE
11. AS OF DATE
16. REMARKS
~ailoring of DI-MG~-80355) (1) Contractor installation phase (2) Precutover phase which begins upon completion of the contractors installation phase and is completed when cutover begins (major activity during this phase shall be implementation testing), (3) Cutover phase during which the new system is placed into operational service, and (4) Postcutover phase which begins at the completion and continues until normal operations and maintenance are underway. 10.4 Part III Management: This part shall identify and describe the management structure necessary for the orderly implementation of the cutover plan. It shall include military and contractor representatives: it shall provide for both area cutover management; shall describe the chain it G001 CutoverPlan (cont.)
5, CONTRACT REFERENCE
15.
TOTAL-->
3. SUB~TLE
FREQUENCY
8. APPCODE
1% AS OF DATE
13. DATEOF SUBSEQUENT SUBMISSION
1~. RE~AEKS (Tailoring of DI-MGMT-80355) of command and the authority and responsibility of each command element. 10.5 Part IV Site Cutover Operation Sheets (COS): This part shall prepared as separate documents. The COSshall identify and schedule the cutover activities required just prior to cutover. The entries on them shall define all physical work to be performed at all locations. Work items shall be time-phased and the contractor and Government activity responsible for each item shall be shown. (1) Each sheet shall represent a work operation at a location where cutover activities must be performed. (2) The site COSshall be arranged into books on a per-site basis. (3) The plan shall include audio frequency and dc (TTY) circuit be cutover at each site. (4) Approval of and changes to this part of the H. DATE L APPROVED BY G. PREPARED BY
J. DATE
DD Form 1423-2,
10591183
JUN 90
Previous editions
are obsolete
Page
16 of 36 Pages
Attachment
6
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 13 of 14
DD Form 1423-2: Contract l~a Requirements List ) CONTRACT DATA REQUIREMENTS LIST (2 Data Items)
(2 Data los Form Approved OMB 0704-0188 No.
A. CONTRACT ITEM NO. LINE 0003 D. SYSTEM/iTEM AUTOMATED TECHNICAL CONTROL G001
B. EXHIBIT Q
C. CATEGORY:
TM OTHER TESTING TDP F. CONTRACTOR E. CONTRACT/PR NO. N00600-94-C-0389
Cutover Plan (cont.)
5. CONTRACT REFERENCE
I. DD250 REQ
10. FREQUENCY
14,
DISTRIBUTION
6. APPCODE
11. AS OF DATE
(Tailoring of DI-MGMT-80355 continued) cutover plan shall be coordinated with local military personnel at each site. 10.6 Part V Removal of Replaced Equipment and Materials: This part shall be included in the cutover plan only for those sites at which the contractor proposes to remove existing equipment. As such, this segment of the plan shall clearly specify the specific items of equipment to be removed, existing location, reasons for removal, and equipment disposition. 10.7 Part VII GovernmentParticipation: The cutover plan shall clearly delineate the extent and schedule of the Governmentparticipation required during the cutover phase. The cutover of items for which the Governmenthas responsibility must be displayed in detail and the schedule for each activity specified. G002 System Test andVerification Plan
E. CONTRACT REFERENCE
DI-T-5422 21 Jul 77 of
10. FREQUENCY
S.O.W. 3.9.1
12~ DATEOF RRST SUBMISSION
PMW 152
ONE/R
6. APPCODE 11. AS OF DATE
SeeBlock 16
b. COPIES
AN 30 DARC
16. REMARKS
Block 4: Delete DID para 10.13 Block 12: Submit NLT 180 days prior to scheduled start. Government will review and comment or approve NLT 30 DAR. B!~cE 2: Submit separate plan for each site.
PMW 152-21F CNCTC N622
3 1
G. PREPARED BY
H. DATE
L. APPROVED BY
4 4 J. DATE
DD Form 1423-2, Attachment 6
JUN 90
Previous editions
are obsolete
Page
17 of 36 Pages
Case 1:02-cv-00796-FMA
Document 46-10
Filed 03/18/2005
Page 14 of 14
DD Form 1423-2: Contract J~a Requirements List CONTRACT DATA REQUIREMENTS LIST (2 DataItems)
(2 Data l~s)
Form Approved OMB No. 0704-0188
A. CONTRACT LINE ITEM NO, 00O3
B. EXHIBIT R
c. CATEGORY: OTHER TESTING CONTRACTOR
D, SYSTEMu3TEM AUTOMATED TECHNICAL CONTROL G003
TDP E. CONTRACTIPR NO. N00600-93-R-2790
Test Procedure
5. CONTRACT REFERE~NCE
Design Verification
Test Procedures
REQUIRING O~CE
DI-NDTI-80~3of 1 Jun 88
7. DD250 REQ
S.O.W. 3.9.1.2 ONE/R See Block 16
PMW152
LT
8. APPCODE
b. COPIES
AN
See B~ck 16 PMW152-21F CNCTC N622
Draft
Block 12: Submit NLT 150 days prior to scheduled start of testing. Bock 13: Government will review and comment or approve NLT 30 DAR. Revisions due NLT 30 DARC. 3lock 2: Submit separate procedures for each site.
15. TOTAL 1. DATA ITEMNO.
2
G004
Test
Repo~
6, REQUIRING O~SE
DI.NDT]-80604 1 Jun 88 of
10. FREQU~CY
S.O.W,3.9 30 DATC
PMW152
As required
8. APPCODE 11. AS OF DATE
b. COPIES 13. DATEOF SUBSEQUENT SUBMISSION Draft
Block 10: Submit a separate report for each test conducted. Block 2: Submit a separate report for each site's tests.
PMW152-21F CNCTC N622
1 1
15.
TOTAL-->
G. PREPARED BY
H. DATE
L. APPROVED BY
2 J. DATE
DD Form 1423-2, A~achment 6
JUN 90
Previous editions
are obsolete
Page
18 of 36 Pages